1. Building energy saving

The roof tile production line can speed up project construction, reduce the investment in roof support materials, and save construction costs for real estate developers. The raw materials used in production are mostly industrial waste. In addition to reducing industrial pollution, it can also "turn waste into treasure". In addition to using sand as fine aggregate, molded colored cement tiles can also use industrial waste residues such as fly ash, power plant steel slag, etc. The factory slag can be used as fine aggregate after wet grinding and activation treatment, and its blending amount can reach about 60%, thus saving resources, land and protecting the environment.

2. Molding at room temperature

Due to the high-pressure molding using a 150t press, there is no need to maintain high-temperature sintering steam. Generally, when the outdoor temperature is above 20 degree , the mold can be demoulded in 8 hours. The product size is accurate, the edges and corners are neat, and the bite is reliable.

3. Multiple tile types

4. Ceramic tiles are light in weight

The tiles are large in size and the units are light in weight. Its general size is 428 mm x 336 mm. The weight of a single piece is 3.6-4 kg, and the weight per square meter is 36-40 kg. Clay-fired colored tiles and glazed tiles cost about 16 pieces per square meter, 3 kilograms per piece, and 45-51 kilograms per square meter.

5. Diversified structure

It can avoid the single structure of the traditional roll forming process, and the higher part of the tile head acts as a water barrier. Even if it is used on a sloped roof below 10 degrees, there will be no rainwater backflow.

6. Reliable grinding